Router Table is one of the advanced machine which can help you out with performing a lot of operations. One of the positive fact about it, is that it can be used easily by a pro as well as an amateur person. So what are the things or tasks that you can perform with the help of a router table? Find them out below.
What Can You Do With A Router Table – Necessary Things
Router table is a machine which has got a vertical spindle on it, and it is mainly used with cutting and trimming wooden pieces. Some of the basic tasks which you can perform using a router table are listed below. Let’s begin!
Make Rounded Edges
I mostly recommend this job for all the beginners out there. You can try out the rounded edges for almost all the wood projects, be it table, small bench, or even on stands. It is also known that rounded edges are more pleasing to the eyes compared to the squared ones. If you have small kid at your home, then rounded edges will always be a big benefit for you.
To try out this, first lock the router bit to the collet portion of the router. Now after that you will have to set the depth of the router bit. You are set! Run the router, and get the perfect rounded edge!
Build Boxes or a Standard Drawer
If you were planning to make boxes during the old times, then it would have been difficult to build the current style boxes. Now, you are made available with so many wood tools, that you can easily follow the working and get the desired box or a drawer designed for your home.
When you are making drawers, you have to keep the same size for the drawers as well as the openings. There may be some pieces which are huge to handle, but you can make use of belt sander, and hand-plane in that case to get the required wood portion for the job.
Try out a freehand routing with a starting pivot
When you are dealing with small wooden pieces, then they will be hard to handle on those compact hand-held routers. You will require a bit with the bearing guide, so that you can go against the guiding path on it. You can also performing shaping and other trimming job with this same setup.
With keeping a starting pivot for the routing job, you can have more control over the routing process. After you are done with the routing, it is must to sand the surface which will give you the perfect result. It is better to hire a pro user for better understanding on the working.
Read more: How to use Vidmate App to download Videos easily?
Shaping the wood along with Trimming
When you get into the working of the router, you will realise that you will need bits for the trimming and edge routing. There are bits which are specifically used for the edge routing purpose. There are many such similar bits available, but the most common ones are the edge bit and groove bit.
For the processing, first you have to insert the bit and then tighten the collet nut. After this, you have to set the bit depth. Then, set the cutting depth just before starting with the routing.
Get started with the Dadoes
If you are looking out ways to support the shelf, then the dadoes will come to your help! Dado is a flat bottom piece of wood in which the wood is cut through the grain portion.
If you want to get a particular dado on the wood, then you need to buy the matching bit for the dado. It is recommended to set the bit-speed to a lower value initially, and then you can increase it later as you get more experienced with the work.
Rabbet Cuttings
Rabbet cuttings are nothing less than the usual groove cuts which are made near the edge portion of a wood piece. This cut will be more clear to you when you take a cross-section of it, and analyse it carefully. The french word ‘rabbat’ means a recess to the wall, and the meaning has been rightly derived from it.
Follow our page The Hotel Cafe Tour for more such cool updates and other interesting facts.
There are Tips and Tricks of Router Table, which you must know if you are dealing with one. Check on the link provided to understand it more in detail.
You can also follow Beingwoodworkers and stay updated with all the routing advancements.